Please note that the club forum is no longer active and is only visible as an archive.
Information is now sent out via our various alternative means of communicating through our WhatsApp group, Facebook page, the core web site and, of course, club nights and at events face to face.
Steering Damper
-
varleym
- Posts: 414
- Joined: Wed Feb 17, 2010 4:42 pm
- Location: Harrogate
- Full Name: Mark Varley
Steering Damper
Contrary to my original thoughts, when I've come to re-fit my steering damper it seems it's knackered - quite a bit of free play.
Now I know that some people advocate running without a damper, but I would be grateful for fellow club members views on the topic. Also, would you recommend fitting any other than an OE unit?
Cheers
Mark
Now I know that some people advocate running without a damper, but I would be grateful for fellow club members views on the topic. Also, would you recommend fitting any other than an OE unit?
Cheers
Mark
-
davew
- Chairman
- Posts: 2256
- Joined: Fri Jan 05, 2007 8:54 pm
- Location: Knaresborough
- Full Name: Dave White
If you change over to a Disco setup you'll need to change the damper anyway, either running one behind the axle or rigging up a bracket on the front.
I run without a damper because, in general, all they do is mask a problem and it's sometimes better to fix the problem rather than mask it. I'd suggest you try it without first and see how it goes. If you have the pre-load setup and all your bushes and track rod ends are 100% then you shouldn't need one. If you run without one and it works fine then one day in the future you have a problem you know something is amiss. With a damper on things have to have got pretty bad before you'll notice.
Having said all that, on Pam's I fitted a Britpart one behind the axle because no matter what I tried I couldn't track down a problem it had when it hit a pothole and adding a damper completely cured it.
I run without a damper because, in general, all they do is mask a problem and it's sometimes better to fix the problem rather than mask it. I'd suggest you try it without first and see how it goes. If you have the pre-load setup and all your bushes and track rod ends are 100% then you shouldn't need one. If you run without one and it works fine then one day in the future you have a problem you know something is amiss. With a damper on things have to have got pretty bad before you'll notice.
Having said all that, on Pam's I fitted a Britpart one behind the axle because no matter what I tried I couldn't track down a problem it had when it hit a pothole and adding a damper completely cured it.
Who is online
Users browsing this forum: No registered users and 0 guests