Club Forum

Members' Forum

300tdi troubles

Need to know what's broken and maybe how to fix it ? Post here
Post Reply
User avatar
tecnick
Posts: 969
Joined: Tue Jan 09, 2007 9:52 am
Location: Leeds
Full Name: Nick Adams

300tdi troubles

Postby tecnick » Sun Apr 20, 2014 1:20 pm

Hi all. Got alternator off, can't budge pulley wheel, any clues?
Need water pump off, can't budge pulley wheel also not sure of size of wp bolts, 10mm too floppy. Any clues.
Rad out for good access and replacent.
If it ain't broke, I'd be bloody suprised.
Top
User avatar
Graeme C.
Posts: 252
Joined: Wed Jan 31, 2007 7:31 pm
Full Name: Graeme Christie

Postby Graeme C. » Sun Apr 20, 2014 3:47 pm

The water pump bolts might be 3/8". Do you mean the pulley on the alternator because they can be a b@%$£r to shift.
Nothing is impossible with the right attitude and a big hammer.
Top
User avatar
tecnick
Posts: 969
Joined: Tue Jan 09, 2007 9:52 am
Location: Leeds
Full Name: Nick Adams

Postby tecnick » Sun Apr 20, 2014 8:04 pm

Yes, and it is. Had 30ft bars on the swine;)
Cheers Nick
If it ain't broke, I'd be bloody suprised.
Top
User avatar
Matthews
Treasurer
Posts: 1273
Joined: Sat Jan 06, 2007 2:45 pm
Location: Leeds
Full Name: Matthew Sykes

Postby Matthews » Tue Apr 22, 2014 7:38 pm

Alternator pulley is usually a windy gun affair , water pump pulley bolts are 10 mm but you need a good quality 6pt socket/spanner or you'll round em off
Top
User avatar
tecnick
Posts: 969
Joined: Tue Jan 09, 2007 9:52 am
Location: Leeds
Full Name: Nick Adams

Postby tecnick » Wed Apr 23, 2014 8:09 am

Got it off with angle grinder:)
Cheers Nick
If it ain't broke, I'd be bloody suprised.
Top
User avatar
tecnick
Posts: 969
Joined: Tue Jan 09, 2007 9:52 am
Location: Leeds
Full Name: Nick Adams

Postby tecnick » Fri Apr 25, 2014 2:48 pm

now I have found the P gasket, if original is fine, should I just leave it alone or replace it whilst water pump etc is off?
If it ain't broke, I'd be bloody suprised.
Top
User avatar
Matthews
Treasurer
Posts: 1273
Joined: Sat Jan 06, 2007 2:45 pm
Location: Leeds
Full Name: Matthew Sykes

Postby Matthews » Fri Apr 25, 2014 4:41 pm

Replace it
Top
User avatar
tecnick
Posts: 969
Joined: Tue Jan 09, 2007 9:52 am
Location: Leeds
Full Name: Nick Adams

Postby tecnick » Sat Apr 26, 2014 8:49 am

Ok but if I have to marshal my first event this year I'm blaming you. (Going piglet btw, will tell you why sometime)
Cheers Nick
If it ain't broke, I'd be bloody suprised.
Top
Post Reply

Return to “Technical Info”

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Limited
 

 

cron