Search found 184 matches
- Tue Oct 02, 2012 5:41 pm
- Forum: Technical Info
- Topic: single key for door locks
- Replies: 8
- Views: 26646
- Tue Oct 02, 2012 2:37 pm
- Forum: Technical Info
- Topic: single key for door locks
- Replies: 8
- Views: 26646
- Tue Oct 02, 2012 12:44 pm
- Forum: Technical Info
- Topic: single key for door locks
- Replies: 8
- Views: 26646
- Tue Oct 02, 2012 10:22 am
- Forum: Technical Info
- Topic: single key for door locks
- Replies: 8
- Views: 26646
single key for door locks
I see sets of 3 door locks on ebay for the defender. I'm changing my front doors for some better condition ones and am thinking about buying new lock barrels for them. Is it possible to get a new barrel for the rear door that will use the same key? Does this need to be a newer one piece style rear d...
- Fri May 18, 2012 9:31 am
- Forum: Technical Info
- Topic: Water in the injection pump
- Replies: 2
- Views: 8981
Thanks Nick. Pretty sure it's only Matthew and me that have had top off of the pump and no screwdrivers were used. There was never a seal between the two surfaces and the diaphragm seems to fit well into the bottom surface/groove. I've dried it out but will check the surfaces over and maybe use a li...
- Wed May 16, 2012 8:27 pm
- Forum: Technical Info
- Topic: Water in the injection pump
- Replies: 2
- Views: 8981
Water in the injection pump
After a playday at Tong, dabbling with some deep water (top of wing level), I seem to have got some into the injector pump. It's in the top under the diaphragm where the metering cone is but not above the diaphragm. Is this a major problem or just something to keep an eye on after going through deep...
- Sat Mar 31, 2012 8:43 pm
- Forum: Technical Info
- Topic: Fitting Superpro bushes - where to grease?
- Replies: 2
- Views: 11108
- Sat Mar 31, 2012 4:45 pm
- Forum: Technical Info
- Topic: Fitting Superpro bushes - where to grease?
- Replies: 2
- Views: 11108
Fitting Superpro bushes - where to grease?
Just got some Superpro bushes for the panhard rod on my 90 as the ordinary bushes have worn PDQ.
There is a thing of grease in the kit and Superpro say to grease the bushes - but not where to put it.
Does it go between the metal tube and the poly bush?
Cheers, Dave
There is a thing of grease in the kit and Superpro say to grease the bushes - but not where to put it.
Does it go between the metal tube and the poly bush?
Cheers, Dave
- Tue Mar 13, 2012 2:13 pm
- Forum: Technical Info
- Topic: Self locking door
- Replies: 5
- Views: 23990
Our skoda re-locks the doors if you unlock them then don't open anything within 10 seconds (or something like that). But if you open a door it doesn't. Sounds odd on yours.... As for my door, I think I'm going to add a bit of bungy cord to apply slight tension to the button and hold it up. If that d...
- Mon Mar 12, 2012 9:49 am
- Forum: Technical Info
- Topic: Self locking door
- Replies: 5
- Views: 23990
- Sun Mar 11, 2012 7:06 pm
- Forum: Technical Info
- Topic: Self locking door
- Replies: 5
- Views: 23990
Self locking door
My drivers door keeps locking itself when I try to open it from the inside. Unlock door with key. Open door and get it. Close door and drive. Open door using inside latch, the lock button drops part way and the door doesn't open. Had the liner off and can't see anything binding or wrong. Squirted lo...
- Mon Oct 31, 2011 1:08 pm
- Forum: Technical Info
- Topic: Starter motor repairs in Harrogate?
- Replies: 4
- Views: 22347
- Mon Oct 24, 2011 2:52 pm
- Forum: Technical Info
- Topic: My Discovery 1 this time.
- Replies: 23
- Views: 70902
- Sun Oct 23, 2011 10:00 am
- Forum: Technical Info
- Topic: My Discovery 1 this time.
- Replies: 23
- Views: 70902
- Tue Jul 26, 2011 3:17 pm
- Forum: Member's Vehicles
- Topic: Repainting the motor
- Replies: 15
- Views: 130819