Search found 184 matches
- Tue May 28, 2013 8:21 am
- Forum: Technical Info
- Topic: Winches
- Replies: 29
- Views: 266249
- Mon May 27, 2013 9:19 pm
- Forum: Technical Info
- Topic: Winches
- Replies: 29
- Views: 266249
- Mon May 27, 2013 4:51 pm
- Forum: Technical Info
- Topic: Winches
- Replies: 29
- Views: 266249
- Mon May 27, 2013 1:04 pm
- Forum: Technical Info
- Topic: Winches
- Replies: 29
- Views: 266249
Winches
I've started thinking about fitting a winch. I'd like to keep the cost down as low as possible while still getting something that will actually be useful. I'm happy to sort the wiring and so on myself and to weld in a winch tray to my existing HD bumper. So the main cost will be the winch itself. I'...
- Sat Feb 09, 2013 4:43 pm
- Forum: Technical Info
- Topic: Lack of Electricity
- Replies: 12
- Views: 97837
- Thu Feb 07, 2013 2:47 pm
- Forum: Technical Info
- Topic: Waterproofing the air filter
- Replies: 1
- Views: 14747
Waterproofing the air filter
Despite having a snorkel, I seem to have got muddy water into the air filter housing. I'm pretty sure all the hoses are sound and/or sealed and that the only way it is likely to have got in is through the little rubber drain valve at the front/bottom of the housing. I had thought this would be OK bu...
- Thu Feb 07, 2013 1:59 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
- Wed Feb 06, 2013 3:57 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
Having checked the oil in the diff, it was full of mucky grey emulsion. And I do mean FULL! Probably explains why it was leaking from the pinion seal. I drained the oil, flushed it with some paraffin to try and clean out the gunge and refilled with clean EP90. The pinion flange/input flange seems to...
- Tue Feb 05, 2013 8:30 pm
- Forum: Technical Info
- Topic: Tubed or tubeless?
- Replies: 6
- Views: 39827
- Mon Feb 04, 2013 4:13 pm
- Forum: Technical Info
- Topic: Tubed or tubeless?
- Replies: 6
- Views: 39827
Tubed or tubeless?
I'm currently running my tyres with tubes. Mainly as it made it easier for me to put them together and fit them myself. One of the tubes seems to have given up - not sure if it is the patch I've just fitted or the seam in the tube where the patch is as that also looked like it was starting to fail. ...
- Thu Jan 31, 2013 1:25 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
- Thu Jan 31, 2013 12:44 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
- Wed Jan 30, 2013 6:50 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
- Wed Jan 30, 2013 5:26 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
Front propshaft out. Went for a drive and the noise is gone. The front diff is leaking from the pinion flange (again - I'm sure I've already replaced the seal) so I'll check and fill the oil but I'm thinking I'll be replacing the diff. Any suggestions whether it is better to replace with a recon uni...
- Wed Jan 30, 2013 2:01 pm
- Forum: Technical Info
- Topic: Transmission whine
- Replies: 11
- Views: 45439
Transmission whine
My 90 has developed a deep whine above 25-30 mph while under power (not on engine breaking). If I want to check if it is the diffs, can I just remove the propshaft from each one or do I need to remove the half shafts too?
Cheers,
Dave
Cheers,
Dave